Concrete hardened wear-resistant sealed and cured floor is a liquid environmentally friendly and water-based floor material; it is a permeable, sealed, hardened material; it is a permeable, sealed, hardened material; the compounds that can penetrate into the concrete and semi-hydrated cement, free calcium, silicon oxide and other substances contained in the condensed concrete have undergone a series of complex chemical reactions to produce hard substances. These final compounds will increase the density of the concrete surface, thereby improving the strength, hardness, wear resistance, and permeability of the concrete surface.

The final product of complex chemical reactions will block and seal the structural pores of concrete (corne floor, terrazzo floor). The increase in strength will lead to an increase in surface hardness and the increase in density will lead to an increase in permeability. The path to reduce the flow of water, that is, the invasion of harmful substances is reduced, thereby greatly enhancing the corrosion resistance of chemical substances of concrete (corne floor, terrazzo floor). Therefore, concrete sealing and curing agent can bring long-term sealing, strong, wear-resistant and dust-free concrete (corne floor, terrazzo floor) surface layer

Hard and wear-resistant: Optimal increase of Mohs strength to 8-9 degrees.
Effective seal: Isolate solid and liquid impurities from entering the concrete.
Resistant to chemical erosion: Inhibit chemicals from entering concrete.
Thorough dustproof: Improve surface compactness and effectively prevent dust from occurring on the concrete surface.
Good anti-aging: will not turn yellow or resist whitening. The general service life is 15-20 years.
Respiratory function: Allows gas and liquid to flow freely, avoiding peeling and microcracking problems on the ground.
Permanent gloss: The hard ground continuously rubs during use, and the brighter it becomes.
Simple maintenance: Simple cleaning, no waxing required, reducing high maintenance costs.
Safety and environmentally friendly: colorless, odorless, non-toxic, water-based environmentally friendly products.
Strong permeability: Excellent permeability, permeable concrete 5-8mm.

Concrete hardened wear-resistant dust-resistant sealed and cured floors are suitable for any environment that needs clean indoor and outdoor. They are easy to clean, hard, highly wear-resistant, weak chemical erosion, and high requirements for penetration resistance, on the base surfaces of new and old concrete, cartilage wear-resistant floors, terrazzo floors, stone and other bases, such as underground parking lots, highways, factories, shopping centers, warehouses, parking lots, service stations, aircraft hangars, freight distribution yards and other areas.

1. Grinding the base surface: Use a professional grinder to fully polish it with a 100-mesh resin grinding disc (can be wetted with clean water and then polished), exposing the clean and fresh surface of the concrete.
2. Clean the base surface: Clean the dirt generated by the grinding. If the water grinding is used for the ground, all the accumulated water needs to be cleaned.
3. Spraying materials: Use concrete sealing and curing agent to spray evenly on the ground after grinding (dose per square meter: 0.4kg-0.5kg), and fully react for 2-4 hours.
4. Clean the base surface: When the surface begins to become viscous, moisten the ground with bright water for about 2 hours, then remove all the bright water and dry naturally for more than 12 hours.