Epoxy self-leveling is a floor construction technology. The coating used is made of epoxy resin and special curing agents. It is processed through strict proportioning by adding various additives, pigments, fillers, etc. It not only has excellent chemical properties such as water resistance, oil stain resistance, chemical corrosion resistance, etc., but also has the advantages of good adhesion, high mechanical strength, low shrinkage rate of paint film after curing, and can be painted into thick film at one time. Therefore, it is widely used in the coating of modern industrial floors. This process can flow in a smooth and seamless manner according to the unevenness of the ground, automatically level the ground and dry quickly. The solidified ground will form a smooth, flat and seamless mirror effect layer. In addition to the leveling function, self-leveling can also prevent moisture, antibacterial, anti-corrosion and other characteristics, and is widely used in clean rooms and sterile rooms in the fields of medicine, biology, electronics and other fields.

The surface is flat and bright, and it achieves a mirror effect;

Variety of colors, non-toxic, odorless, seamless, beautiful and comfortable;

Clean and seamless, dust-proof and easy to clean;

Tough, wear-resistant, good drug resistance, non-toxic and non-agent alkenes;

It has high adhesion, strong mechanical strength, chemical resistance and good electrical properties;

High flatness, wear resistance, beauty, dustproof, high strength, easy to clean, low maintenance costs, good chemical resistance, and high mechanical strength.

It is suitable for clean rooms or sterile rooms in the pharmaceutical industry, blood products industry, medical industry, biological research, electronics and microelectronics industries that implement GMP standards. It can also be used in other industries that require aesthetics, wear resistance, impact resistance and chemical resistance, such as schools, offices, chemical factories, food factories, etc.

1. Grinding and dust removal of base surface;
2. Apply a sealing primer;
3. Apply mortar layer during scraping;
4. Apply putty layer during scraping
5. Mid-coated and dusted;
6. Apply self-leveling epoxy topcoat.

Storage construction

1. Store at room temperature in a dry and ventilated place;
2. Avoid direct contact with the skin and eyes;
3. After mixing the two components evenly, let stand for a few minutes and use up within 1 hour. Clean the tools immediately after construction;
4. The temperature below 10℃ and humidity above 85% should be selected for low temperature and humidity conditions;
5. Pedestrians can be made after three days of construction, and driving within five days.