Modern industry continues to develop towards automation and electronicization. High-tech enterprises and key laboratories have extremely high requirements for the ground environment. They not only require the ground to have anti-static functions, but also require the ground to have high wear resistance and high impact resistance. The epoxy self-leveling anti-static floor coating system can meet such requirements, realizing the three-effect combination of high wear resistance, high impact resistance and anti-static functions.

While continuing the excellent properties of the traditional self-leveling floor coating system, this system also adds a two-component epoxy self-leveling floor coating system prepared by adding conductive powder and surfactant. It can effectively prevent static electricity from aggregation and release the accumulated static electricity brought by foreign objects through conduction dissipation, and has the function of preventing static sparks.

1. The coating is automatically leveled and the surface is flat and bright;

2. No joints, no dust, and easy to clean the surface;

3. Solvent-free, environmentally friendly;

4. It can quickly leak static charges to prevent damage and fire from electronic components due to accumulation of static electricity;

5. The surface resistance is stable and long-lasting, and is not affected by weather humidity and surface wear;

6. A dense surface can resist the erosion of a variety of chemicals;

7. A variety of colors are available. Light color varieties, black fibers may be more obvious

Suitable for anti-static places in electronics, communications, printing, computer rooms, precision machinery, powder, chemistry, gangster, aerospace and other industries. Especially suitable for the production workshop and storage areas of electronic components such as electronic instruments, integrated circuits and other electronic components with high sensitivity to electrostatic electricity.

1、Check the ground and repair cracks:After grinding, check the ground to see if there is any loose ground falling off during the hair pulling process. If necessary, use epoxy mortar to repair it.
2、Basin polishing and vacuuming:Use a professional floor grinder to grind the base surface to be made entirely once (eventually make the epoxy floor tightly bond to the floor).
3. Clean the dust on the ground.
4、Determination of humidity:The "Rubber Pad Test" uses a 1m×1m polyethylene film to stick it on the concrete surface with tape (built-in drying tissue) and takes it away after 24 hours, so that the amount of condensate is determined. 
5、Epoxy anti-static primer:The purpose is to close the surface and the primer penetrates the floor, so that the epoxy floor is closely integrated with the floor (the primer mixes the main material and curing agent in proportion, stirs evenly, and paints the base surface, requiring uniformity and no omissions).
6. Clean the dust on the ground.
7、Lay copper foil:Paste copper foil with elastic wire (spacing 1m×1m).
8、环氧防静电中涂：The purpose is to further repair, level the ground, and prepare for topcoat construction. Mix the main material of the middle coated mortar and the curing agent in proportion, stir well, and the construction time is limited to about 30 minutes. Use a toothed trowel to make the surface smooth.
9、Lightly grind and vacuum the base surface:Use a professional floor grinder to grind the base surface to be made entirely once (in the end, the epoxy floor is better and more tightly bonded together).
10、Epoxy putty layer:The purpose is to further repair, level the ground, and prepare for topcoat construction. Mix the middle coated main material and curing agent in proportion, stir well, and set the construction time of mixing for about 30 minutes. Apply it once to make the surface flat.
11、Epoxy anti-static level coating (or self-flow surface coating):After the middle coating is cured, the construction area is closed and no idle personnel are allowed to enter and exit. Re-clean the ground, carefully check, remove surface particles, repair ground defects, and use a vacuum cleaner to vacuum and clean the floor for surface coating. First stir the main epoxy topcoat material evenly, then add the curing agent to the main material bucket. After stirring well, spray it with a high-pressure airless sprayer, pay attention to the construction direction and construction interval. If there are curing blocks in the stirring barrel primer, it must be stopped and replaced. The surface coating after adding the curing agent must be used within 30 minutes.